Metal edging
Metal edges around the whole roof guides water into the gutters and protects the fascia.
Roof Replacement
Roof Installation Fairfield, NJ
A roofer in Fairfield can install a new roof in the proper sequence: drip edge, ice and water shield, underlayment, starter strip, flashing, vents and then the roofing itself, whether the roof is going on a stripped deck or as a permitted overlay. One call to (973) 858-9960 reaches a nearby roofing contractor.
A quality roofing material can still fail early if it is installed carelessly. Nails driven above the reinforced strip, flashing left out at a sidewall and short valleys are the kind of mistakes that show up within a few seasons. Those are details you cannot see from the yard, which is why the installer matters so much.
Choosing the material comes first. Most homes get dimensional asphalt shingles, but metal panels, stone coated steel, tile and slate are all options, and each has its own installation rules. The slope of the roof limits the options, because shingles need a minimum pitch and nearly flat sections need a membrane roof.
It helps to bring a few details to the first conversation. Mention whether the old roof is coming off or this is new framing, what material you have in mind and any spots that have leaked before.
Depending on what the roofer finds, roof installation in Fairfield, NJ can go hand in hand with roof replacement and shingle roof installation.
Dealing with this in Fairfield, NJ right now? Call (973) 858-9960 and describe the problem to a roofer who works in Fairfield.
Call nowThe process
The installation sequence
Here is the usual order for installing a shingle roof.
Prepare the deck
Installation starts on a sound, dry deck, so damaged sheathing is cut out and replaced first. If the job is an overlay instead, the existing roof has to be flat enough to accept a new layer.
Edge metal first
Drip edge goes on at the eaves, ice and water shield is rolled out along the eaves and in the valleys, and drip edge is then added along the rakes over the underlayment. Codes in colder areas often require the ice barrier to reach a set distance inside the exterior wall.
Cover the deck
The remaining deck is covered with underlayment, overlapped at the seams and fastened on the maker's pattern. Most crews now use synthetic underlayment, which holds up better to foot traffic and weather.
Flash the roof
Flashing goes in as the roofing goes up: step pieces at walls, a kickout at the bottom edge and boots on every pipe. Reused or caulk-only flashing is one of the most common installation shortcuts.
Install the roofing
A starter strip goes along the eaves and rakes, then shingles are laid in straight courses and nailed in the reinforced nail zone, with four or six nails each as the maker specifies. In cold weather, shingles may need hand sealing because the sealant strips will not bond until warm sun hits them.
Cap the ridge
Exhaust vents go in near the peak and the ridge is capped. Without enough soffit intake, a ridge vent cannot do its job.
What is included
Components of the installation
Ventilation
Ridge vents or other exhaust paired with soffit intake which protects the roofing and the decking.
Roof covering
Starter strip, field shingles and ridge caps, or the panels and trim for a metal roof in straight, even courses.
Underlayment
A full layer of underlayment plus ice barrier where water collects backs up the roofing in wind-driven rain.
Roof flashing
New flashing at every wall, chimney and vent pipe instead of reusing old metal.
Related service
New Roof Installation Fairfield, NJ
New roof installation covers three common jobs: replacing a roof after tear-off, roofing a new home and roofing an addition. Additions take extra care, because the new roof has to tie into the old one with matching shingles, woven or flashed valleys and step flashing where the new roof meets an existing wall. Ask whether the new section will match the existing roofing or whether the whole roof should be redone.
Manufacturers publish exact steps for their products, and local code usually requires following them. A Fairfield roofer should be able to explain how many nails per shingle will be used, what underlayment goes down and what ventilation the attic will have. Vague answers about the hidden layers are worth noticing.
Related service
Roof Overlay Fairfield, NJ
A roof overlay installs a new layer of shingles directly over one existing layer instead of tearing the old roof off. Most codes allow no more than two layers, which means an overlay is ruled out if there are already two, or if the deck is soft or the old shingles are buckled. It saves the labor of a tear-off and keeps the house closed during the job.
An overlay comes with downsides worth weighing. Hidden rot stays hidden, flashing is often reused and the roof carries the weight of two layers. If an overlay is on the table, ask the roofer to confirm the layer count, replace the drip edge and flashing and explain what happens at the next replacement, when both layers must come off.
Local help
Roof Installation Near Me
Around Fairfield, roof installation work covers older houses getting their second or third roof and newer homes adding on. Older homes in Fairfield and nearby towns like Pine Brook, Lincoln Park, Caldwell and Towaco often need extra deck work and better ventilation, while newer homes are more likely to need flashing tied into new siding, and a careful installation is what lets a new roof ride out years of weather.
Need roof installation around Fairfield? Call (973) 858-9960 for a Fairfield roofer who serves the towns around it too.
Roofs in this climate
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Fairfield is busiest after a hard winter and before the next one.
Why call
Why act early
Drier ceilings
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Familiar with local homes
Roofers in Fairfield know the roof types and weather wear common in local homes.
Know what happens next
Ask your questions before you agree to anything.
Roof Installation questions
How many days does roof installation take?
A typical house takes one to three working days once materials are on site. Larger, steeper or more cut-up roofs need more days.
What happens if a roof is installed in winter?
Roofs can go on in cold weather with some extra steps. Shingles can crack when cold, and the sealant may not activate until warm weather, so hand sealing is common. Ice and snow on the deck must be cleared before anything is installed.
Is a permit needed to install a new roof?
Requirements depend on where you live, but a permit is common for a full roof. Ask who will apply for the permit and whether an inspection is required.
What should be installed under the shingles?
Under the shingles you should find drip edge at the edges, ice and water shield at the eaves and in the valleys and underlayment over the rest of the deck. Starter strip, step and kickout flashing and new pipe boots are also part of a proper installation.
Which roofing material is best for my house?
That depends on the house, the slope of the roof and your priorities. Architectural asphalt shingles suit most homes, metal lasts longer and sheds snow well, and tile or slate need framing that can carry their weight. A Fairfield roofer can lay out the trade-offs for your roof.
More questions? Call (973) 858-9960
Often needed together
Roof Replacement
Replacing an aging roof with new underlayment, flashing, vents and roofing, built to current code from the decking out.
Learn moreShingle Roof Installation
New shingle roofs built layer by layer on a sound deck, so the roof sheds water and handles wind from day one.
Learn moreMetal Roof Installation
Choosing and installing a metal roof, from panel type and gauge to underlayment, trim and closures, with high-temperature underlayment and proper flashing.
Learn moreNew Construction Roofing
Roofing for new homes, additions, garages and other new framing, from dry-in to the finished ridge, so the house is protected before interior work starts.
Learn more
Looking for something else?
See all roofing servicesTalk to a Fairfield roofer about roof installation
Call now for Fairfield roof installation and help in the towns around it.